Turn on the DC output for the barrel port and set the output voltage here. Omnicharge can remember your Last Setting and you can use Preset to select most common voltage. Use Set Voltage if you need a special DC output voltage.
Choose whether the AC three-prong outlet will output 120V AC or 150V HVDC. The default setting is AC which can support most common devices. Choose HVDC here if you have a switch mode power supply.
Choose whether the USB output is On or Off when you turn on your Omnicharge. The default setting is On and we suggest you keep it this way because the standby power consumption is rather low and negligible while it can ensure you a seamless charging experience.
Note: the actual USB output on and off operation is still operated by the USB Button on the front panel.
Set the OLED screens auto turn-off time here. The default setting is 1 min.
Choose whether or not your Omnicharge will automatically shut off. The default setting is Off and we suggest you keep it this way because the standby power consumption is rather low and negligible while it can ensure you seamless charging experience.
Choose Fahrenheit or Celsius here.
Turning On silent mode will disable the cooling fan. The default setting is Off.
Note: Without the fan running, the heat generated from charging/discharging needs longer to dissipate and the Omni20 might enter 'Overheating Protection'.
Find the Model Name, Capacity, Firmware Version Number and Serial Number here.