1. Make sure your laptop's power consumption falls within Omnicharge's 70 watts (1V-24V, up tp 3.5A) DC output limit.
2. Make sure you have set the correct DC output voltage on your Omnicharge.
If you have followed two steps above but DC output still doesn't work, then it should be the special signal/sensor chip which is required for your specific laptop that causes this compatibility issue.
Some manufacturers put an extra signal/sensor chip in their product's power adaptor containing the identification info of the power adapter so that it can only work with designated models.
DALLAS 2501 signal chip inside Dell Latitude power adaptor (courtesy of laptop junction)
It's a safety design to make sure some inferior third-party power adapters won't damage your laptop. However, this also causes compatibility issues since Omnicharge's DC output cables and converter tips can't cover all the signal/sensor chip designs across different brands and models.
If this happens, please use Omnicharge's AC outlet instead of the DC output function to charge your laptop. Contact us at email@example.com and our support staff will do their best to find an alternative solution.
The sensor chip inside HP Pavilion 65W power adaptor
The signal pin inside Lenovo Thinkpad X1 Carbon 45W power adaptor